Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with






See the difference
Before
After
Before
After
Before
AfterPanel Replacement in Tampa, FL
Garage door panel replacement in Tampa typically costs $150 to $450 per panel, parts and labor included, and is usually completed the same day we arrive. The final number depends on panel size, material, and whether the damage is isolated or part of a wider track or spring issue. At Marlow Garage Door Repair Tampa, you get a written price before any work starts, so the number we quote is the number you pay. For any related issues, explore our Garage Door Repair services.
A dented or cracked panel isn’t just a visual problem. It compromises the door’s balance, lets in Florida heat and humidity, and weakens the door’s overall structure over time. We’ve been fixing garage doors in Tampa since 2002, and we handle Garage Door Repair in Tampa with one rule: tell you exactly what’s wrong, what it costs, and fix it right the first time. Call us at (850) 761-0207 if you’re looking at a damaged panel and want a straight answer.
When You Need Panel Replacement
Tampa’s humidity, afternoon thunderstorms, and the occasional stray hurricane branch do real damage to garage doors. Here’s what actually calls for a new panel versus a repair:
- Impact damage from a vehicle or object. A car bump, a stray basketball, or a lawn mower that kicked a rock can dent or puncture a panel. Even a small dent weakens the steel or aluminum, and Tampa’s moisture gets into the crack and starts corrosion.
- Split or buckling panel edges. We see this regularly in older Tampa homes near the water, especially in South Tampa, Davis Islands, and along Bayshore Boulevard, where salt air accelerates deterioration at panel seams.
- Visible cracks in fiberglass or wood panels. If you have an older door with wood or fiberglass panels, cracks let rainwater in and the panel slowly rots from the inside.
- Rusted-through sections. Coastal humidity in areas like Westchase and Town ‘N Country means steel panels without proper coating can rust clear through. Once you can see daylight through the rust, replacement is the only fix.
- A door that’s hard to open or uneven when closing. A bent panel creates drag on the tracks. You’ll notice the door hesitating, grinding, or sitting crooked. That friction wears out rollers and cables faster, turning a panel problem into a bigger repair bill.
- After a storm. Tampa gets its share of summer squalls. A panel that took a direct hit from flying debris might look fine from the curb but have hidden stress fractures. If the door shudders or sounds different after a storm, it’s worth having us look.
If you’re not sure whether the panel can be repaired or needs full replacement, call (850) 761-0207. We’ll tell you honestly, because writing a quote for work you don’t need isn’t how we operate.
Our Panel Replacement Process
Replacing a garage door panel is more involved than people expect. The panel carries weight, aligns with the track, and has to work with springs that are under serious tension. Here’s how Marlow Garage Door Repair Tampa handles it, step by step:
- You book online in under a minute. Pick a time that works, and you’ll see your tech’s live arrival window on your phone. No four-hour guessing games, no sitting around waiting.
- We inspect the full door, not just the dent. Before touching anything, we check the tracks, rollers, hinges, cables, and springs. A panel that took a hard hit often means the surrounding hardware took some stress too. We find every issue before we quote.
- You get a written price before we start. No verbal estimates that change at the door. The number on your quote is the number on your invoice. Every time.
- We replace the panel and test the full door. We match the panel to your existing door by lifting the brand, measuring the profile, and confirming the color and finish. The new panel gets installed, balanced, and tested through several full open-and-close cycles.
- We show you before-and-after photos and hand you a digital invoice. You see the work, you see the price, and you pay from a link. That’s the Relay Visibility Guarantee, and it’s on every job we do.
Panel Replacement Pricing in Tampa
Here’s what panel replacement realistically costs in the Tampa market, based on the most common doors we service:
- Single steel panel replacement: $150 – $280 installed. Most common for standard 16 x 7 doors.
- Aluminum panel replacement: $180 – $320 installed. Frequent in coastal neighborhoods where lighter doors are common, such as Davis Islands and Beach Park.
- Wood or wood-look composite panel: $250 – $450 installed. Often seen in older Hyde Park and Seminole Heights homes, where matching grain and stain matters.
- Impact-rated or hurricane panel: $300 – $550 installed. Homes in evacuation zones or under newer building codes often specified these. They cost more because the panel itself is engineered to a stricter wind-load standard.
Factors that move the price: panel height and width, the finish (embossed, flush, raised), whether the door uses a discontinued profile, and whether we discover additional damage to rollers, hinges, or the torsion spring while we’re working. We carry stock for most major brands including Wayne Dalton, Craftsman, and Raynor, so we can often match your existing door same-day without a special order.
Every panel replacement from Marlow carries our 365-Day Done Right Promise. If the installation isn’t right, we come back and make it right, free, for a full year. Written down, not buried in fine print. Call (850) 761-0207 for a free estimate on your specific door, and we’ll give you an exact number before any work begins.
FAQs – Panel Replacement
How much does garage door panel replacement cost in Tampa?
Panel replacement in Tampa costs $150 to $450 per panel depending on material, size, and whether the panel is standard steel, aluminum, wood-look composite, or impact-rated. Call (850) 761-0207 with your door’s brand and approximate panel size, and we’ll give you a written price before any work starts. Free estimates, always.
Can you replace just one panel, or do I need a whole new door?
In most cases a single damaged panel can be replaced without buying a new door, as long as the panel profile is still being made by the manufacturer. We’re trained on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so we can identify your door and check availability quickly. If the panel is discontinued, we’ll tell you straight and talk through your options, including whether a new door makes more financial sense than a custom-fabricated panel.
Can you replace a garage door panel the same day I call?
Yes, in most cases. We keep common panel profiles in stock for standard doors, and our Tampa-based team runs same-day appointments when slots are open. Book online, see your tech’s live arrival time, and get a written price before we touch anything.
Is it cheaper to replace a panel or the whole door?
Replacing a single panel is almost always cheaper than a full door replacement, typically saving $600 to $1,800 depending on the door. But if the door is 15-plus years old, has rust on multiple panels, or the springs are near the end of their life, a new door may be the better long-term move. We’ll give you honest numbers for both options and let you decide, no pushy sales pitch. Call (850) 761-0207 for a straight answer on your specific situation.
Does panel replacement affect my garage door spring or balance?
It can. A heavier or lighter replacement panel changes the door’s total weight, which affects how the torsion spring, the horizontal coil above your door that does most of the lifting, performs. Our techs check the spring tension during every panel replacement and adjust it as part of the job; if needed, we also handle Spring Repair. Springs under tension are dangerous to work on without proper training and tools, so this is not a DIY step. We handle it as part of the install.
Key Takeaways
- Panel replacement in Tampa runs $150 – $450 per panel, and we give you a written price before any work starts.
- We match your existing door by manufacturer and profile, including Wayne Dalton, Craftsman, and Raynor.
- Same-day appointments are usually available, and you track your tech’s arrival live from your phone.
- Every panel replacement is covered by the 365-Day Done Right Promise for a full year.
- Call (850) 761-0207 for a free estimate, or book online in under a minute.
Contact Marlow Garage Door Repair Tampa
If you have a dented, cracked, or rusted garage door panel in Tampa, don’t wait until the humidity and rain make it worse. Call Marlow Garage Door Repair at (850) 761-0207 for a free estimate and a written price you can count on. We’ve been fixing Tampa’s garage doors since 2002, and we answer every call with a live person, 24/7.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair Tampa, serving Tampa.